Tuesday, September 15, 2009

Universal Unbrick Disk (Guide on how to unbrick your Nintendo Wii - Part 2)

Here's another part of the tutorial which you can unbrick your Wii and install Firmware 4.0:

UUD is now on v2 and will work with FW 4.0.Additional you will not need a Modchip, cIOS-CORE or Rescue Menu Hacks to be installed.It will also work with the Original Rescue Menu and you only need a modded Original GC Controller and the cIOS249 installed.Thats all.I changed the game partition to run with IOS249 and its set to autoboot.So aslong you have the cIOS249 installed and its a cIOS with cDIP module it will work.


Than i updated the ticket and tmd to be named as UUD but i have to change the game partition, the iso itself and the crypted name of the game too to be fully displayed as "Universal UnbrickDisc"
And be sure you use a ORIGINAL GC Controller becouse we cant manage to boot into rescue menu with a 3-Party GC Controller.

-Good Luck in Unbricking your Wii-

Since more and more users run into a (Semi) Brick and more and more users have a cfw for the wii installed i decided to make a new "Universal Unbrick Disc" witch combines the semi brick disc and the autoboot wad manager.iso.And not enough, i modded the disc specially to use it with or without a modchip.Before this releas, if a softmod user runs into a brick and can not use the wiimote or start the hbc or dont have the wad manager channel installed on the wii he must found some one in the near with a modchip to unbrick his Wii or simply buy one of it.

Becouse the released discs dont match the 4,37gb and the cIOS-CORE cant boot discs without the correct size and / or without the update partition.So i ripped of Wii-Play and placed it full with dummys and it worked.Than i removed the dummys and only build a partition with the opening.bnr and this also worked.It seems that fst.bin will be only freeze your Wii if the loaded .dol will take use of it.There for the wad manager.dol dont use the fst.bin on the disc it could be 0ripped.As next step i saved the ripped partition and used the Animal Crossing iso to place the ripped data partition and to have the FW 3.3 update on one disc.

So we have a Universal Unbrick Disc witch could be used either with Modchip and with cIOS-CORE (or only with cIOS and BackupLoader apps).You could use it as Autoboot WAD Manager disc to install wad´s from sd,usb,ect., or to Unbrick your (C)FW 3.2 Wii with the Nintendo internal rescue menu if you have activated it via starfall and the two rescue menu hacks.
For all ppl who want to change the disc to normal boot, i have swapped the opening.bnr with the one from Zelda TP

How to Use:
- Extract and burn the image
- Turn on Wii and insert disc to auto boot WAD Manager
- Turn on Rescue Menu and insert disc to auto boot WAD Manager
- Have Fun -

Download: UUD v2
Source: ps3 news


  1. Hi, My wii is banner bricked, I burn the UUD v2 and use an original GC controller and press the directional pad, but the wii still load up the warning screen and afterward it still pop up a black screen. What am i doing wrong?

    I noticed you mentioned it has to be a modded GC contoller, so how do I mod a GC controller? I just went to buy this at game stop a few hours ago. I was told that this was the "original nintendo GC controller". Please help. thanks

  2. what did you do before you got that black screen? have you installed preloader? if you did, power on your wii then press reset button and the preloader menu will appear. reinstall preloader and if nothing happen you can ask me again...

  3. witbolleke@hotmail.comDecember 21, 2009 at 4:43 PM

    The download link doesn't work.
    Could you send me a correct link
    I really need this.

  4. the download link is not available anymore.. if your wii is also with black screen, we have the same problem. that is the worst thing that a wii could have...

    you may check the address below on wii unbricking: